The PLATA-LED™ Luminaire
The PLATA-LED™ is an LED vapour-tight wet location luminaire designed to replace HID and Fluorescent fixtures in commercial, industrial, and institutional lighting applications.
The PLATA-LED™ features provide a highly efficient low cost solution that delivers extreme power savings along with low installation and maintenance costs. The PLATA-LED™ is suitable for mounting heights < 20ft and is a perfect choice for engineers, contractors, distributors and end users.
A one piece injected molded polycarbonate housing contains two removable gasketed polycarbonate pinch posts that support a removable steel gear tray. The back of the gear tray provides multiple fastening points where drivers and electrical components may be fastened. Further, the gear tray provides openings for low voltage wiring to pass through adjustable bushings as well as quarter turn fasteners. Polycarbonate lensing is fastened to the housing via eight stainless steel hasps. 0.825" diameter holes located at each end with rubber gasketed plugs are included.
In the medium output version, highly specular aluminum field adjustable reflectors provide efficient light delivery in a choice of wide throw distribution for lower mounting heights (i.e., parking garages) and downward distribution for higher mounting heights. The high output version is available with one general distribution pattern for all mounting heights. High efficiency clear polycarbonate injection molded lensing with inner prisms is supplied standard. Diffuse lensing is available upon request.
PLATA-LED™ luminaires offer > 100 Lumens/Watt; CRI > 80; THD < 10%; PF > 99. Projected life beyond 100,000 hours. LED modules and drivers are offered with a standard 5-year warranty based on performance under normal conditions (consult warranty for details).
Two removable stainless steel snap clips are provided to allow simple installation for both surface ceiling and pendent mount applications.
NOTE: Safety chain by others is recommended for applications that may subject the fixture to possible impact.
The PLATA-LED™ is cETLus listed for wet locations and -40°C to +35°C ambient environments. (for warmer ambient temperatures consult J2 Light). IP66 rated. DLC and RoHS compliant. LED modules comply with IESNA LM-79 and LM-80 standards.
Internal occupancy sensor is available for light/power control. Diffuse polycarbonate lens available upon request.
NOTE: Specifications subject to change without notice.
0-10V Dimming Drivers
|PL||15.9 cm (6.25 in)||127 cm (50 in)||10.2 cm (4 in)||3.6 kg (8 lbs)|
|PH||15.9 cm (6.25 in)
||127 cm (50 in)
||10.2 cm (4 in)
||3.6 kg (8 lbs)|